- Place of Origin:
-
Jiangsu, China
- Type:
-
Nickel Wire
- Application:
-
Electronic tubes
- Grade:
-
FeNi50
- Ni (Min):
-
50%
- Resistance (μΩ.m):
-
43Microhm-cm
- Powder Or Not:
-
Not Powder
- Ultimate Strength (≥ MPa):
-
550
- Elongation (≥ %):
-
30
- Model Number:
-
HR-013
- Brand Name:
-
HeRui
- Standard:
-
UNS N14052
- Surface:
-
Bright
- Delivery Time:
-
20 Days
- MOQ:
-
50kgs
Alloy 52 (aka Pernifer 50, NILO 50, Glass Seal 52)
Description:
A controlled expansion alloy, consisting of 51% Nickel, balance Iron, used in a wide variety of electronic applications, especially for glass seals. Alloy 52 is a nickel iron alloy whose coefficient of expansion closely mirrors soft glass. Applications for this product include magnetic reed switches and seals that need controlled linear expansion to approximately 525 °C.
Alloy 52 Basic Chemical Composition (Weight %)
Ni: 50.50
Cr: 0.10 max
Mn: 0.60 max
Si: 0.30 max
C: 0.05 max
Al: 0.10 max
Mg: 0.50 max
P: 0.025 max
S: 0.025 max
Fe: Balance
Typical Mechanical Properties
Alloy 52 Annealed As Rolled
Ultimate Tensile Strength (PSI) 75,000 130,000
Yield Strength (PSI) 30,000 125,000
Elongation 30% 1%
Modulus of Elasticity (PSI) 24 x 10e6
Poisson’s Ratio 0.29
Typical Physical Properties
Density 0.300 lbs/cu in
Melting Point 1425° C
Electrical Resistivity @ RT 43 Microhm-cm
Temp. Coefficient Resistivity 2900 PPM/°C
(20 to 100° C)
Thermal Expansion Coefficient 10.0 x 10e-6/°C
(30 to 400° C)
Applications
Glass to metal seals for electronic tubes, automotive and industrial lamps, and specialty hermetic devices.
Available Forms: Alloy 52 is available in Strip, Sheet, Plate and Wire.
ZHENJIANG HERUI BUSINESS BRIDGE IMP&EXP Co., Ltd is a leading manufacturer and supplier of high speed steel, non-magnetic steel, nickel-based alloys, etc. we can supply in forms of wire, strip, sheet, rod, bar, tube and pipe at competitive prices to meet our customers’ requirements. Our Products can be widely used in petrochemical industry, aviation & aerospace, metallurgy, machinery, electronics, energy and so on. Our company possesses a fully integrated production process, it starts from vacuum melting to final packaging led by the quality control and R&D teams, ensures all products meet the standards strictly. We always can serve the reliable products with on-time delivery. “quality first, customer foremost “, Zhenjiang Herui Business Bridge IMP & EXP Co., Ltd welcomes you to visit our company sincerely and be dedicated to supplying you our quality products with the best service.
Product Category
High speed steel
Non-magnetic steel
Mold / Die steel
High-temperature alloys
Corrosion-resistance alloys
Precision alloys
Pure nickel
Welding wire
Thermal spraying wire
Capillary tube
Q: Are you trading company or manufacturer?
A: We are a manufacturer with our own import and export company.
Q: How long is your delivery time?
A: Generally speaking, 20 days according to the quantity.
Q: Do you provide samples?
A: Yes, we could provide the sample free of charge.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, the balance before shipment.
Q: How can I place order?
A: You can contact us by email, or place orders online.
Q: How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T, L/C, Western Union are the most usual ways we are using. If you want to use other way, please tell me, we can discuss it.
Q: What’s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
Q: How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.